Instruments and Controls

See also:

Removal and Installation of the Sealant Canister
To remove the sealant canister: 1. Unwrap the sealant hose. 2. Press the canister release button. 3. Pull up and remove the canister. 4. Replace with a new canister which is available from your ...

When the System Does Not Seem to Work Properly
The following messages may be displayed on the DIC: PARKING ASSIST OFF: This message occurs if the driver disables the system or if vehicle is driven above 8 km/h (5 mph) in R (Reverse). S ...

Ignition Positions (Key Access)
The ignition switch can be turned to four different positions. To shift out of P (Park), the ignition switch must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied. Notice: ...