Automatic Operation, If Equipped
AUTO: Press the air delivery mode button until this setting is selected to control the inside temperature, air delivery, and fan speed. AUTO appears in the display when automatic operation is active.
+ or − (Increase/Decrease Temperature): Press the + or − buttons to increase or decrease the cabin temperature. The rear control temperature display will show the temperature setting increasing or decreasing.
The display only indicates climate control functions when the system is in rear independent mode.
See also:
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Drain Plug
B. Fill Plug
If the level is below the bottom of the fill plug hole, located on the transfer
case, some lubri ...
High/Low—Beam Headlamps (Uplevel)
The high/low beam headlamps on the uplevel are High Intensity Discharge
(HID) and should be replaced at the dealer. ...
Traction Control System (TCS)
The traction control system limits wheel spin. The system is on when the
vehicle is started.
- To turn off traction control, press and release located on the console.
illuminates and the a ...






