Shifting out of Park
This vehicle is equipped with an electronic shift lock release system. The shift lock release is designed to:
- Prevent ignition key removal unless the shift lever is in P (Park) with the shift lever button fully released.
- Prevent movement of the shift lever out of P (Park), unless the ignition is in ON/RUN or ACC/ ACCESSORY and the regular brake pedal is applied.
The shift lock release is always functional except in the case of an uncharged or low voltage (less than 9 volt) battery.
If the vehicle has an uncharged battery or a battery with low voltage, try charging or jump starting the battery. See Jump Starting for more information. To shift out of P (Park) use the following:
1. Apply the brake pedal.
2. Move the shift lever to the desired position.
If you still are unable to shift out of P (Park):
1. Ease the pressure on the shift lever.
2. While holding down the brake pedal, press the shift lever all the way into P (Park).
3. Move the shift lever to the desired position.
If you are still having a problem shifting, then have the vehicle serviced soon.
See also:
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The heigh ...
Loading the Vehicle for Off-Road Driving
WARNING
Unsecured cargo on the load floor can be tossed about when driving over
rough terrain. You or your passengers can be struck by flying objects. Secure
the cargo properly.
Keep ...
Storing Button Memory Positions
To save positions into Button Memory:
1. Adjust the driver seat, seatback recliner, both outside mirrors, and
adjustable pedals, if available, to the desired driving positions.
2. Press and hold ...