Making Turns

Notice: Making very sharp turns while trailering could cause the trailer to come in contact with the vehicle. The vehicle could be damaged. Avoid making very sharp turns while trailering. When turning with a trailer, make wider turns than normal. Do this so the trailer will not strike soft shoulders, curbs, road signs, trees or other objects. Avoid jerky or sudden maneuvers. Signal well in advance.

If the trailer turn signal bulbs burn out, the arrows on the instrument panel will still flash for turns. It is important to check occasionally to be sure the trailer bulbs are still working.

    See also:

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. A. Drain Plug B. Fill Plug If the level is below the bottom of the fill plug hole, located on the transfer case, some lubri ...

    Tire Rotation and Required Services Every 12 000 km/ 7,500 mi
    Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation  . Check engine oil level and oil life percentage. If needed, change engine oil an ...

    Transmission Messages
    DIFFERENTIAL HOT, REDUCE SPEED (CTS-V ONLY) This message displays and a chime sounds if the differential fluid temperature exceeds 150°C (300°F). Driving aggressively or at high speeds can ...