Electrical System Overload
The vehicle has fuses and circuit breakers to protect against an electrical system overload.
When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems.
Fuses and circuit breakers protect power devices in the vehicle.
Replace a bad fuse with a new one of the identical size and rating.
If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible.
See also:
Brake Fluid
The brake master cylinder reservoir
is filled with DOT 3 brake fluid as
indicated on the reservoir cap.
See Engine Compartment Overview for the location of the
reservoir.
There are only two ...
Back-Up Lamps
To replace this bulb:
1. Open the liftgate. See Liftgate for more information.
2. Remove the two screws from the taillamp assembly.
3. Pull the taillamp assembly rearward until the ...
Trailer Towing
(Except CTS-V and
Coupe)
Before pulling a trailer, there are
three important considerations that
have to do with weight:
- The weight of the trailer.
- The weight of the trailer tongue.
- The total weight on the vehicl ...






