Lockout Protection
If the power door lock switch is pressed when the key is in the ignition and a door is open, all the doors will lock and only the driver door will unlock. If the doors are closed, they can be locked by using the Remote Keyless Entry (RKE) transmitter. Be sure to remove the key from the ignition when locking the vehicle.
This feature can be overridden by pressing the lock button on the RKE transmitter or by pressing the power lock switch a second time.
See also:
Bluetooth Controls
Use the buttons located on the infotainment system and the steering wheel to
operate the Bluetooth system.
Steering Wheel Controls
(Push To Talk): Press to answer incoming calls, confirm system ...
Starting the Vehicle with a Low Transmitter Battery
If the transmitter battery is weak, the DIC may display NO REMOTE DETECTED
when you try to start the vehicle. The REPLACE BATTERY IN REMOTE KEY message
may also be displayed at this time.
To star ...
License Plate Lamp
1. Remove the two screws holding each of the license plate lamps to the molding
that is part of the liftgate.
2. Twist and pull the license plate lamp assembly forward through the molding
openi ...