Precise dimensional accuracy

Cadillac DTS / Overview / Precise dimensional accuracy

Engineers developed and adhered to hundreds of criteria points when developing the DTS, and the result is outstanding fit, finish and overall harmony of the elements.

Fit, flushness and gaps are on a par with the best executions in the world. Interior gaps are 5 millimeters or less, with the vast majority less than 2 mm. The exterior of the DTS has extremely tight surface-to-surface relationships, making it appear as if it were crafted from a single piece of billet steel. Such refinement is evidenced in hood to fascia gaps that are a mere 4 mm, fender-to-headlamp relationships of less than 1 mm, hood-to-fender relationships within 1 mm, and taillamp-to-decklid relationships of less than 2 mm.

    See also:

    2013 Cadillac ATS Review
    Topping out third gear I’ve got just enough time to think about grabbing fourth when the first braking marker is past my front tire and I’m pushing hard on the four piston Brembos. The lightest ca ...

    Engine Compartment Fuse Block (CTS Coupe and Sedan)
    The underhood fuse block is located on the left side of the engine compartment. Lift the fuse block cover to access the fuses. The vehicle may not be equipped with all of the fuses and rel ...

    Reducing Speed While Using Cruise Control
    If the cruise control system is already activated: - Press and hold the −SET button on the steering wheel until the desired speed is reached, then release it. - To slow down in small a ...