Three-Way Calling
Three-Way Calling must be supported on the cell phone and enabled by the wireless service carrier to work.
1. While on a call press
.
2. Say “Three-way call.” 3. Use the dial or call command to dial the number of the third party to call.
4. Once the call is connected,
press
to link all callers
together.
See also:
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate for more information.
Passenger Side Shown, Driver Side
Similar
2. Push the left end of the lamp assembly towards the ri ...
Battery Power Protection
This feature shuts off the dome lamps if they are left on for more than 10 minutes
when the ignition is in LOCK/OFF. This helps to prevent the battery from running
down. ...
Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to
replace the DRL bulb.
2. Disconnect electrical connector.
3. Remove the DRL bulb socket from the headlamp assembly.
4. ...






