Transferring a Call
Audio can be transferred between the in-vehicle Bluetooth system and the cell phone.
The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.
Transferring Audio from the Bluetooth System to a Cell Phone
To transfer a call with the audio in the vehicle:
1. Press 
.
2. Say “Transfer Call.”
Transferring Audio to the Bluetooth System from a Cell Phone
During a call with the audio on the
cell phone, press for
two seconds. For vehicles with a
navigation system say “Hands Free”
after the tone. The audio transfers
to the vehicle. If the audio does not
transfer to the vehicle, use the audio
transfer feature on the cell phone.
See your cell phone manufacturer's user guide for more information.
See also:
Sensors
The solar sensor, located on top of the instrument panel near the
windshield, monitors the solar heat.
The climate control system uses the sensor information to adjust the
temperature, fan speed, ...
Adaptive cruise control
The XLR will be among the first vehicles with adaptive cruise control (ACC).
While not a substitute for full driver attention, this system greatly expands
the convenience of cruise control. ACC us ...
Turn and Lane-Change Signals
An arrow on the instrument panel cluster will flash in the direction of the
turn or lane change.
Move the lever all the way up or down to signal a turn.
Raise or lower the lever until the a ...