Leaving After Parking on a Hill

1. Apply and hold the brake pedal while you:

1.1. Start the engine.

1.2. Shift into a gear.

1.3. Release the parking brake.

2. Let up on the brake pedal.

3. Drive slowly until the trailer is clear of the chocks.

4. Stop and have someone pick up and store the chocks.

    See also:

    Engine Power Messages
    ENGINE POWER IS REDUCED This message displays and a chime sounds when the cooling system temperature gets too hot and the engine further enters the engine coolant protection mode. See Engine Over ...

    Distance to Destination
    This display will show the vehicle distance with estimated time of arrival to destination. The value can be cleared or reset by pressing the SET/CLR button. Move the thumbwheel up or down to increas ...

    Anti-theft Alarm System Messages
    SERVICE THEFT DETERRENT SYSTEM This message displays when there is a problem with the theft-deterrent system programmed in the key. A fault has been detected in the system which means that t ...