Cellular and GPS Antennas

Avoid placing items over or near the antenna to prevent blocking cellular and GPS signal reception.

Cellular reception is required for OnStar to send remote signals to the vehicle.

    See also:

    License Plate Lamp (Coupe and Sedan)
    To replace one of these bulbs: 1. Push the tab to remove the license plate lamp. 2. Turn the license plate lamp assembly down to remove it. 3. Turn the socket counterclockwise and remove it ...

    Starting the Engine Using Remote Start
    1. Press and release on the RKE transmitter. 2. Within two seconds, press and hold until the turn signal lamps flash. This confirms the request to remote start the vehicle has been received. If the ...

    Entering the Personalization Menus
    1. Press CONFIG to access the Configuration Settings menu. 2. Turn the MENU/SELECT knob to highlight Vehicle Settings. 3. Press the center of the MENU/SELECT knob to select the Vehicle Settings men ...