Reading Lamps
There are reading lamps located on the overhead console and over the rear passenger doors. These lamps come on automatically when any door is opened.
To manually turn the reading lamps on or off:
- For the overhead console reading lamps, press the button next to each
lamp.
- For the rear passenger reading lamps, press the lamp lens.
For more information on interior lighting, see Instrument Panel Illumination Control.
See also:
Cleaning the Video Screens
Use only a clean cloth dampened with clean water. Use care when touching or
cleaning the screens as damage could result. ...
Certification Label
Label Example
A vehicle-specific Certification
label is attached to either the
driver door edge or the lower
center pillar on the driver side of
the vehicle. The label tells the
gross wei ...
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...