Initial Drive Information
This section provides a brief overview about some of the important features that may or may not be on your specific vehicle.
For more detailed information, refer to each of the features which can be found later in this owner manual.
See also:
Flash-to-Pass
The flash—to—pass feature works with the low beams or Daytime Running Lamps
(DRL) on or off.
To flash the high beams, pull the turn signal/lane change lever all the way
toward you, then release i ...
Universal Remote System Programming
If the vehicle has this feature, you will see these buttons with one
indicator light next to them in the overhead console.
This system provides a way to replace up to three remote control tran ...
Keyless Unlocking
With the transmitter within 1m (3 ft), approach the front door and pull the
handle. If the transmitter is recognized, the door will unlock and open.
Entering any door other than the driver door wi ...