Performance and Maintenance
See also:
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A
single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstac ...
Ending Cruise Control
There are four ways to end cruise
control:
- Step lightly on the brake pedal
(manual and automatic
transmissions).
- Press the clutch pedal to the
floor (manual transmissions).
- Press on ...
Fuel Used
The Fuel Used display shows the approximate liters (L) or gallons (gal) of
fuel that have been used since last reset.
The fuel used can be reset by pressing the SET/CLR button while the Fuel
Used ...






