StabiliTrak® System

The StabiliTrak system assists with directional control of the vehicle in difficult driving conditions.

The system is on when the vehicle is started.

- To turn off both Traction Control and StabiliTrak, press and hold until illuminateand and the appropriate DIC message displays. See Vehicle Messages.illuminate and the appropriate DIC message displays. See Vehicle Messages.
- Press border=0>again to turn on both systems.again to turn on both systems.

For more information, see StabiliTrak® System.

    See also:

    TPMS Sensor Matching Process
    Each TPMS sensor has a unique identification code. The identification code needs to be matched to a new tire/wheel position after rotating the vehicle’s tires or replacing one or more of the TPMS se ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. For Two-Wheel-Drive vehicles, the proper level is from 15mm to 40mm (0.6 in to 1.6 in) below the bottom of the filler plu ...

    Recalling Button Memory Positions
    To recall the manually saved Button Memory positions, press and hold “1” or “2.” The driver seat, outside mirrors, and adjustable pedals, if available, move to the positions stored to those buttons ...