Shutting the Engine Off After a Remote Start
To cancel a remote start, do any of the following:
- Press until the parking lamps turn off." width=22 height=22 id="_x0000_i1159"
src="images/books/1183/1/index.102.gif" border=0>until the parking lamps turn off.
- Turn on the hazard warning flashers.
- Turn the vehicle on and then back off.
See also:
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Turn and Lane-Change Signals
An arrow on the instrument panel cluster flashes in the direction of the turn
or lane change.
Move the turn signal lever all the way up or down to signal a turn.
Raise or lower the lever until t ...
Second Row Passenger Belt Reminder Light
When the engine is started and the Trip/Fuel display is chosen, three gray
safety belt symbols come on and stay on for several seconds on the top of the
Driver information Center (DIC) to remind ...