Easy Exit Driver Seat
This feature moves the seat rearward allowing the driver more room to exit the vehicle.
To activate, place the ignition in OFF and open the driver door. If the driver door is already open, placing the ignition in OFF will activate the easy exit driver seat.
This feature is turned on or off using the vehicle personalization menu.
See Vehicle Personalization.
To stop recall movement, press one of the memory, power seat controls, or the adjustable pedal switch, if available.
If something has blocked the driver seat while recalling the exit position, the recall may stop. Remove the obstruction; then press and hold the power seat control rearward for two seconds. Try recalling the exit position again. If the exit position is still not recalling, see your dealer for service.
See also:
Cupholders
This vehicle has a cupholder equipped with a divider that can be adjusted to
accommodate large containers or small containers.
For large containers, push the button to move aside the divider a ...
Washer Fluid
Washer Fluid
When windshield washer fluid is needed, be sure to read the manufacturer's
instructions before use. If operating the vehicle in an area where the
temperature may fall below freezing, ...
Fuses and Circuit Breakers
The wiring circuits in the vehicle are protected from short circuits by a
combination of fuses and circuit breakers. This greatly reduces the chance of
damage caused by electrical problems.
To ch ...