See also:

Compass Calibration Procedure
1. Before calibrating the compass, check that the compass is set to the correct variance zone. See “Compass Variance (Zone) Procedure” earlier in this section. Do not operate any switches ...

Dolly Towing (Rear-Wheel-Drive Vehicles)
Use the following procedure to dolly tow a rear-wheel-drive vehicle from the rear: 1. Attach the dolly to the tow vehicle following the dolly manufacturer's instructions. 2. Put the rear w ...

Remote Vehicle Start
With this feature the engine can be started from outside of the vehicle. Starting the Vehicle 1. Press and release on the RKE transmitter. 2. Within two seconds, press and hold until the turn s ...