Connecting and Controlling a USB Drive
The infotainment system can only play back .mp3 and .wma files from a USB drive.
Only the first 10,000 songs are recognized on the device.
When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.
Connecting a USB Drive
Connect the USB drive to the USB port.
Searching for a Track
It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored.
Files that do not have any meta data stored in the ID3 tag display as Unknown.
Tracks can be searched for by:
- Playlists
- Artists
- Albums
- Song Titles
- Genres
- Folder View
This only displays if a playlist is found on the device.
To search for tracks:
1. Turn the MENU/SELECT knob.
2. Select Search.
3. Select: Playlists, Artists, Albums, Song Titles, Genres, or Folder View.
4. Select the track.
Shuffle Functionality
Turn the MENU/SELECT knob and set Shuffle Songs (Random) to On or Off.
On: Plays current tracks in random order.
Off: Plays current tracks in sequential order.
Repeat Functionality
Turn the MENU/SELECT knob and set Repeat to On or Off.
Repeat On: Repeats the current track.
Repeat Off: Playback starts from the beginning of the current track after the last track finishes.
See also:
Programming with a Recognized Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
For vehicles sold in Canada, two
recognized transmitters are required
to program a new transmitter ...
Care of Safety Belts
Keep belts clean and dry.
WARNING!
Do not bleach or dye safety belts.
It may severely weaken them.
In a crash, they might not be able
to provide adequate protection.
Clean safety belts only wit ...
When to Add Engine Oil
If the oil is below the cross-hatched area at the tip of the dipstick, add 1
L (1 qt) of the recommended oil and then recheck the level. See “Selecting the
Right Engine Oil” in this section for an e ...