Dual Tone Multi-Frequency (DTMF) Tones

The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu—driven phone system.

Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call

1. Press src=. The system responds “Ready,” followed by" width=43 height=18 id="_x0000_i1572" src="images/books/1183/4/index.65.gif" border=0>. The system responds “Ready,” followed by a tone.
2. Say “Dial.”
3. Say the number or name tag to send.

    See also:

    Driving in Mud, Sand, Snow, or Ice
    Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction changes when driving on sand. On loose sand, such as on beaches ...

    How to Add Coolant to the Coolant Surge Tank
    Notice: This vehicle has a specific coolant fill procedure. Failure to follow this procedure could cause the engine to overheat and be severely damaged. If no problem is found, check to see if co ...

    Turning the System On and Off
    The system can be disabled through the Driver Information Center (DIC). See “Parking Assist” under Driver Information Center (DIC) for more information. URPA defaults to the on setting each ti ...