High Intensity Discharge (HID) Lighting
WARNING
The low beam high intensity discharge lighting system operates at a very high
voltage.
If you try to service any of the system components, you could be seriously
injured. Have your dealer or a qualified technician service them.
After an HID headlamp bulb has been replaced, the beam might be a slightly different shade than it was originally. This is normal.
See also:
How to Check Lubricant
To get an accurate reading, the vehicle should be on a level surface.
A. Fill Plug
B. Drain Plug
When the differential is cold, add enough lubricant to raise the level
from 0mm (0 in) to 3. ...
Manual Operation of Power Liftgate
To change the liftgate to manual operation, press OFF on the liftgate switch.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and closed.
To ope ...
Washer Fluid
What to Use
When adding windshield washer
fluid to the vehicle, be sure to read
the manufacturer's instructions
before use. If you will be operating
your vehicle in an area where the
temper ...