See also:

Starting the Engine Using Remote Start
1. Press and release on the RKE transmitter. 2. Within two seconds, press and hold until the turn signal lamps flash. This confirms the request to remote start the vehicle has been received. If the ...

License Plate Lamp (Coupe and Sedan)
To replace one of these bulbs: 1. Push the tab to remove the license plate lamp. 2. Turn the license plate lamp assembly down to remove it. 3. Turn the socket counterclockwise and remove it ...

Using OnStar® Destination Download (US and Canada)
Press the blue OnStar button and an Advisor can locate a point-of-interest or an address and download the necessary information or coordinates to your navigation system. Once the destination is do ...