Delayed Locking
When locking the doors with the power lock switch and a door or the liftgate is open, the doors will lock five seconds after the last door is closed. You will hear three chimes to signal that the delayed locking feature is in use.
Pressing the power lock switch twice will override the delayed locking feature and immediately lock all the doors.
This feature will not operate if the key is in the ignition.
You can program this feature using the Driver Information Center (DIC). See “Delay Door Lock” under Vehicle Personalization .
See also:
Compass Variance (Zone) Procedure
1. Do not set the compass zone
when the vehicle is moving.
On an automatic transmission
vehicle, only set it when the
vehicle is in P (Park). On a
manual transmission vehicle,
only set it w ...
Programming Transmitters to the Vehicle
Only keyless entry transmitters programmed to the vehicle will work.
If a transmitter is lost or stolen, a replacement can be purchased and
programmed through your dealer.
The vehicle can be re ...
Power Door Locks
The switches are located on the
front doors.
(Unlock): Press to unlock the
doors.
(Lock): Remove the key from
the ignition and press to lock the
doors. ...