Manual Liftgate Operation
To unlock the liftgate, press 
on
the power door lock switch or press
on the Remote Keyless Entry (RKE) transmittertwice, see Remote Keyless Entry (RKE)
System Operation .
Press the touch pad on the underside of the liftgate handle (B) and lift up.
Use the pull cup to lower and close the liftgate. Do not press the touch pad while closing the liftgate. This will cause the liftgate to be unlatched.
See also:
StabiliTrak® OFF Light
This light comes on briefly while starting the engine.
If it does not, have the vehicle serviced by your dealer. If the system is working
normally, the indicator light then goes off.
Press and r ...
Conditions in Which Remote Start Will Not Work
The remote start will not operate if any of the following occur:
- The ignition is in any mode other than OFF.
- The transmitter is in the vehicle.
- The hood is not closed.
- The hazard warning ...
Key and Lock Messages
REPLACE BATTERY IN REMOTE KEY
This message displays if a Remote Keyless Entry (RKE) transmitter battery is
low. The battery needs to be replaced in the transmitter. See “Battery Replacement”
unde ...