See also:

Programming without a Recognized Transmitter (Keyless Access Vehicles Only)
If there are no currently recognized transmitters available, follow this procedure to program up to eight transmitters. This feature is not available in Canada. This procedure will take approximatel ...

Daytime Running Lamp (DRL) (Uplevel)
1. From the back side of the headlamp assembly, remove the bottom cap to replace the DRL bulb. 2. Disconnect electrical connector. 3. Remove the DRL bulb socket from the headlamp assembly. 4. ...

Entering the Personalization Menus
1. Press CONFIG to access the Configuration Settings menu. 2. Turn the MENU/SELECT knob to highlight Vehicle Settings. 3. Press the center of the MENU/SELECT knob to select the Vehicle Settings men ...