Shutting the Engine Off After a Remote Start

To manually shut off the engine after a remote start, do any of the following:

- Press turn off. until the parking lamps turn off.

- Turn on the hazard warning flashers.

- Turn the ignition switch on and then off.

    See also:

    STABILITRAK NOT READY
    This message may display after first driving the vehicle and exceeding 30 km/h (19 mph) for 30 seconds. The TCS/StabiliTrak warning light on the instrument panel cluster also comes on. The St ...

    SERVICE ALL WHEEL DRIVE
    This message displays if a problem occurs with the All-Wheel Drive (AWD) system. The vehicle will run in 2WD. This could be caused by: - An electronics problem - An AWD system oil overheat - ...

    SIDE BLIND ZONE ALERT SYSTEM OFF
    This message indicates that the driver has turned the system off. ...