Power Lumbar
To adjust the lumbar support, if equipped:
- Press and hold the top of the control (B) to increase support to the top of the seatback and decrease support to the bottom of the seatback.
- Press and hold the bottom of the control (B) to decrease support to the top of the seatback and increase support to the bottom of the seatback.
- Press and hold the front or rear of the control (B) to increase or decrease support to the entire seatback.
See also:
BATTERY VOLTS LOW
This message displays when the
electrical system is charging less
than 10 volts or the battery has
been drained.
If this message appears
immediately after starting the
engine, it is possibl ...
Air Vents
Use the air outlets located in the center and on the side of the instrument panel
to direct the airflow.
Operation Tips
Keep the hood and front air inlets free of ice, snow, or any other obstru ...
Delayed Locking
With this feature, you can delay the
actual locking of the doors.
When the power door lock switch is
pressed when the key is not in the
ignition and the driver door is
opened, a chime will so ...