STABILITRAK OFF
This message displays when you turn off StabiliTrak, or when the stability control system has been automatically disabled.
The TCS/StabiliTrak warning light on the instrument panel cluster also comes on.
To realize the full benefits of the stability enhancement system, you should normally leave StabiliTrak on. To turn StabiliTrak on or off, see StabiliTrak® System.
There are several conditions that can cause this message to appear:
- If there is overheating, which could occur if StabiliTrak activates continuously for an extended period of time.
- If the brake system warning light is on. See Brake System Warning Light.
- If the stability system takes longer than usual to complete its diagnostic checks due to driving conditions.
- If an engine or vehicle-related problem has been detected and the vehicle needs service.
See your dealer.
The message turns off as soon as the conditions that caused the message to be displayed are no longer present.
See also:
Compass Calibration
The compass can be manually
calibrated. Only calibrate the
compass in a magnetically clean
and safe location, such as an open
parking lot, where driving the
vehicle in circles is not a dange ...
Towing the Vehicle From the Rear
Notice: Towing the vehicle from the rear could damage it. Also, repairs
would not be covered by the vehicle warranty. Never have the vehicle towed from
the rear. ...
Selective Ride Control
The vehicle may have a ride control system called Selective Ride Control.
The setting can be changed at any time. Based on road conditions, steering
wheel angle, and the vehicle speed, the system au ...






