Ride Control System Messages

See also:

Entering the Feature Settings Menu
1. Turn the ignition on. To avoid excessive drain on the battery, it is recommended that the headlamps are turned off. 2. Press the customization button to enter the feature settings menu. ...

Back-Up Lamps
To replace this bulb: 1. Open the liftgate. See Liftgate   for more information. 2. Remove the two screws from the taillamp assembly. 3. Pull the taillamp assembly rearward until the ...

Driving in Mud, Sand, Snow, or Ice
Use a low gear when driving in mud – the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction changes when driving on sand. On loose sand, such as on beaches ...