SERVICE STABILITRAK

SERVICE STABILITRAK - Ride Control System Messages - Vehicle Messages - Instruments and Controls - Cadillac CTS Owners Manual - Cadillac CTS

This message displays if there has been a problem detected with the StabiliTrak® system.

The TCS/StabiliTrak warning light on the instrument panel cluster also comes on.

If this message comes on while you are driving, pull off the road as soon as possible and stop carefully.

Try resetting the system by turning the ignition off then back on. If this message still stays on or comes back on again while you are driving, the vehicle needs service. Have the StabiliTrak system inspected by your dealer as soon as possible.

See StabiliTrak® System for more information.

    See also:

    Using Voice Commands During a Planned Route
    Cancel Route 1. Push . System responds: “OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?”. 2. Say “Yes.” Syst ...

    EPB Release
    To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

    Memory Seats
    On vehicles with the memory feature, memory buttons 1 and 2 on the driver door are used to save and recall memory settings for the driver seat cushion and seatback, outside mirrors, and th ...