Entry Lighting

The headlamps, taillamps, license plate lamps, back–up lamps, dome lamps, and most of the interior lights turn on briefly when the Remote Keyless Entry (RKE) or when the door handle is pulled is pressed, or when the door handle is pulled on a keyless access vehicle.

See Ignition Positions (Key Access) or Ignition Positions (Keyless Access).

After about 30 seconds the exterior lamps turn off, then the dome and remaining interior lights dim to off.

Entry lighting can be disabled manually by changing the ignition out of the OFF position, or by pressing the Remote Keyless Entry (RKE) This feature can be changed. button.

This feature can be changed.

See Vehicle Personalization.

    See also:

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). T ...

    Flash-to-Pass
    Use your high-beam headlamps to signal to a driver in front that you want to pass. It works even if the headlamps are in the automatic position. To use it, pull the turn signal lever toward you, th ...

    Keyless Unlocking
    With the keyless access transmitter within 1m (3 ft), approach the front door and pull the handle to unlock and open the door. On some models there is a touch sensor on the door handle. If t ...