Turning the System On and Off
The system can be disabled through the Driver Information Center (DIC).
See “Parking Assist” under Driver Information Center (DIC) for more information.
URPA defaults to the on setting each time the vehicle is started.
See also:
Turn Signal Lamps
To replace one of these bulbs:
1. Open the liftgate. See Liftgate .
A. Push Pin
B. Taillamp Cover
2. Pull on push pin (A) to release the taillamp cover (B).
3. Remove the taillamp cover ...
Starting the Vehicle
1. Aim the Remote Keyless Entry
(RKE) transmitter at the vehicle.
2. Press and release .
3. Immediately after completing
Step 2, press and hold for at
least four seconds or until the
vehicl ...
Parking Brake (Manual)
he parking brake pedal is located
on the lower portion of the
instrument panel to the left of the
steering wheel.
To set the parking brake, hold the
brake pedal down, then push the
parkin ...