See also:

Power Assist Steps
The vehicle may have power assist steps. To enable or disable the power assist steps push . The power assist steps automatically extend from beneath the vehicle on the side in which the door ha ...

Turn Signal Lamps
To replace one of these bulbs: 1. Open the liftgate. See Liftgate . A. Push Pin B. Taillamp Cover 2. Pull on push pin (A) to release the taillamp cover (B). 3. Remove the taillamp cover ...

Low-Beam Headlamps/Daytime Running Lamps (DRL), High-Beam Headlamps (Base)
1. From the back side of the headlamp assembly, remove the top cap to replace the low-beam headlamp/DRL bulb. 2. From the back side of the headlamp assembly, remove the bottom cap to repl ...