XM Messages
XL (Explicit Language
Channels): These channels, or any others, can be blocked by request, by calling 1-800-929-2100 in the U.S. and 1-877-438-9677 in Canada.
XM Updating: The encryption code in the receiver is being updated, no action is required. This process should take no longer than 30 seconds.
Loading XM: The audio system is acquiring and processing audio and text data, no action is needed.
This message should disappear shortly.
Channel Off Air: This channel is not currently in service. Tune in to another channel.
Channel Unauth: This channel is blocked or cannot be received with your XM Subscription package.
Channel Unavailable: This previously assigned channel is no longer assigned. Tune to another station.
No Artist Info: The system is working properly. No artist information is available at this time on this channel.
No Title Info: The system is working properly. No song title information is available at this time on this channel.
No CAT Info: The system is working properly. No category information is available at this time on this channel.
No Information: The system is working properly. No text or informational messages are available at this time on this channel.
No Subscription Please Renew: XM subscription needs to be reactivated. Contact XM at www.xmradio.com or call 1-800-929-2100 in the U.S.
and www.xmradio.ca or call 1-877-438-9677 in Canada.
No XM Signal: The system is working properly. The vehicle may be in a location where the XM signal is being blocked. When the vehicle is moved into an open area, the signal should return.
CAT Not Found: The system is working properly. There are no channels available for the selected category.
XM Radio ID: If tuned to channel 0, this message alternates with the XM Radio eight—digit radio ID label.
This label is needed to activate the service.
Unknown: If this message is received when tuned to channel 0, there could be a receiver fault.
Consult with your dealer.
Check Antenna: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer.
XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer.
See also:
Passing
More passing distance is needed when towing a trailer. The combination will not
accelerate as quickly and is longer so it is necessary to go much farther beyond
the passed vehicle before returning ...
How to Detect a Tamper Condition
If is pressed and the horn
sounds, an attempted break-in has
occurred while the system was
armed.
If the alarm has been activated, the
THEFT ATTEMPTED message will
appear on the DIC. See A ...
Towing the Vehicle
Notice: To avoid damage, the disabled vehicle should be towed with all
four wheels off the ground. Care must be taken with vehicles that have low
ground clearance and/or special equipment. Always fl ...