Starter Switch Check
WARNING
When you are doing this inspection, the vehicle could move suddenly. If the
vehicle moves, you or others could be injured.
1. Before starting this check, be sure there is enough room around the
vehicle.
2. Firmly apply both the parking brake and the regular brake.
See Parking Brake.
Do not use the accelerator pedal, and be ready to turn off the engine immediately if it starts.
3. Try to start the engine in each gear. The vehicle should start only in P (Park) or N (Neutral).
If the vehicle starts in any other position, contact your dealer for service.
See also:
Instrument Panel
CTS Shown, CTS–V Similar
A. Air Vents.
B. Driver Information Center (DIC).
C. Instrument Panel Illumination
Control.
D. Turn and Lane-Change Signals.
E. Instrument Cluster.
F. Windshield Wip ...
Automatic Operation
AUTO (Automatic): When automatic operation is active the system will control
the inside temperature, the air delivery, and the fan speed.
Use the steps below to place the entire system in automatic ...
Leaving After Parking on a Hill
1. Apply and hold the brake pedal
while you:
1.1. Start the engine.
1.2. Shift into a gear.
1.3. Release the parking brake.
2. Let up on the brake pedal.
3. Drive slowly until the trailer is
...