Tire Chains
WARNING
Do not use tire chains. There is not enough clearance. Tire chains used on a
vehicle without the proper amount of clearance can cause damage to the brakes,
suspension, or other vehicle parts. The area damaged by the tire chains could
cause loss of control and a crash.
Use another type of traction device only if its manufacturer recommends it for
the vehicle's tire size combination and road conditions. Follow that
manufacturer's instructions.
To avoid vehicle damage, drive slow and readjust or remove the traction device
if it contacts the vehicle. Do not spin the wheels.
If traction devices are used, install them on the front tires.
See also:
Doing Your Own Service Work
WARNING
It can be dangerous to work on your vehicle if you do not have the proper
knowledge, service manual, tools, or parts. Always follow owner manual
procedures and consult the service manual f ...
Compass Calibration Procedure
1. Before calibrating the compass,
check that the compass is set
to the correct variance zone.
See “Compass Variance (Zone)
Procedure” earlier in this
section.
Do not operate any switches
...
Removing the Third Row Seat
To remove the seat:
1. Open the liftgate to access the controls for the seat.
2. Fold the seatbacks forward using lever “1” and the instructions listed previously
under “Folding the Seatback.” The ...






