Engine Drive Belt Routing

border=0>

    See also:

    Passenger Side
    The removal of the air filter/cleaner assembly and base is required for the replacement of one of these bulbs: 1. Open the hood. See Hood. A. Air Duct Clamp B. Connector Lock C. Sensor Co ...

    Checking Coolant
    The vehicle must be on a level surface when checking the coolant level. The engine coolant reservoir is located in the engine compartment on the driver side of the vehicle. See Engine Compar ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). ...