Navigation

OnStar navigation requires the Directions and Connections service plan.

Push border=0>to receive directions or have them sent to the vehicle navigationto receive directions or have them sent to the vehicle navigation screen. Destinations can also be forwarded to the vehicle from Google Maps™ or MapQuest.com. The OnStar mapping database is continuously updated. Visit www.onstar.com for coverage maps.

Turn-by-Turn Navigation

1. Push src=to connect to a live Advisor." width=20 height=20 id="_x0000_i1795" src="images/books/1183/10/index.97.gif" border=0>to connect to a live Advisor.
2. Request directions.
3. Directions are downloaded to the vehicle.
4. Follow the voice-guided commands.

Using Voice Commands During a Planned Route

Cancel Route

1. Push src=. System responds:" width=15 height=17 id="_x0000_i1796" src="images/books/1183/10/index.98.gif" border=0>. System responds:

“OnStar ready,” then a tone.

Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination?”
2. Say “Yes.” System responds:

“OK, route canceled.”
3. Say “Goodbye.” Exits voice commands.

Route Preview

1. Push src=. System responds:" width=15 height=17 id="_x0000_i1797" src="images/books/1183/10/index.99.gif" border=0>. System responds:

“OnStar ready,” then a tone.
2. Say “Route Preview.” System responds with the next three maneuvers.
3. Say “Goodbye.” Exits voice commands.

Repeat

1. Push src=. System responds:" width=15 height=17 id="_x0000_i1798" src="images/books/1183/10/index.99.gif" border=0>. System responds:

“OnStar ready,” then a tone.
2. Say “Repeat.” System responds with the last direction given, then responds with “OnStar ready,” then a tone.
3. Say “Goodbye.” Exits voice commands.

Get My Destination

1. Push src=. System responds:" width=15 height=17 id="_x0000_i1799" src="images/books/1183/10/index.99.gif" border=0>. System responds:

“OnStar ready,” then a tone.
2. Say “Get my destination.” System responds with miles to the destination, then responds with “OnStar ready,” then a tone.
3. Say “Goodbye.” Exits voice commands.

Other Navigation Services Available from OnStar

OnStar eNav: Allows subscribers to send destinations from Google Maps and MapQuest.com to their Turn-by-Turn Navigation or screen-based navigation system.

When ready, the directions will be downloaded to the vehicle.

Destination Download:

Push border=0>, then request the Advisor to download directions to the navigation, then request the Advisor to download directions to the navigation system in the vehicle.

After the call ends, push the “Go” button on the navigation screen to begin driving directions.

Destinations can also be downloaded on the go.

For information about eNav, Destination Download, and coverage maps visit www.onstar.com.

    See also:

    When to Add Engine Oil
    If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section for an e ...

    Windshield
    For safety, appearance, and the best viewing, keep the windshield clean and clear. - Signs of damage include scratches, cracks, and chips. - Trained dealer technicians can inspect the windsh ...

    Exterior
    Built on the same platform as the Chevrolet Suburban and GMC Yukon XL, the Escalade ESV stretches 20.4 inches longer than the regular Escalade. Fourteen of those inches go to extending the wheelba ...