Shoulder Belt Height Adjuster

The vehicle has a shoulder belt height adjuster for the driver and right front passenger positions.

Adjust the height so the shoulder portion of the belt is on the shoulder and not falling off of it. The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly  .

Squeeze the buttons (A) on the sides of the height adjuster and move the height

Squeeze the buttons (A) on the sides of the height adjuster and move the height adjuster to the desired position.

The adjuster can be moved up just by pushing up on the shoulder belt guide.

After the adjuster is set to the desired position, try to move it down without squeezing the buttons to make sure it has locked into position.

    See also:

    When the System Does Not Seem To Work Properly
    The RVC system might not work properly or display a clear image if: The RVC is turned off. See “Turning the RVC System On or Off” earlier in this section. It is dark. The sun or the beam of ...

    Lamp Messages
    SERVICE LEFT HEADLAMP ASSEMBLY On some models, this message will be displayed when the left headlamp is out and needs to be serviced. See “LED Lighting” in LED Lighting   for more infor ...

    Folding the Seatback
    To fold the seatback: 1. Open the liftgate to access the controls for the seat. 2. Remove all items on the seat cushion. Notice: Folding a rear seat with the safety belts still fastened may cause d ...