Traction Control System (TCS)/StabiliTrak® Light
The TCS/StabiliTrak light comes on briefly when the engine is started.
If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the indicator light turns off.
If the light comes on and stays on while driving, and a message displays in the Driver Information Center (DIC), have the vehicle serviced by the dealer. See Ride Control System Messages for more information.
If the light flashes while driving, this means that StabiliTrak or TCS is assisting in controlling the vehicle. See StabiliTrak® System for more information.
See also:
When the System Does Not Seem
to Work Properly
Occasional missed alerts can
occur under normal circumstances
and will increase in wet conditions.
The system does not need to be
serviced due to an occasional
missed alert. The number of mis ...
Entering the Feature Settings Menu
1. Turn the ignition on.
To avoid excessive drain on the
battery, it is recommended that
the headlamps are turned off.
2. Press the customization
button to enter the feature
settings menu. ...
How the System Works
URPA comes on automatically when the shift lever is moved into R (Reverse). A
single tone sounds to indicate the system is working.
URPA operates only at speeds less than 8 km/h (5 mph).
An obstac ...