Flash-to-Pass
Use your high-beam headlamps to signal to a driver in front that you want to pass. It works even if the headlamps are in the automatic position.
To use it, pull the turn signal lever toward you, then release it.
If the headlamps are in the automatic position or on low beam, the high-beam headlamps turn on. They stay on as long as the lever is held. The high-beam indicator on the instrument panel cluster comes on. Release the lever to return to normal operation.
See also:
Manual Operation of Power Liftgate
To change the liftgate to manual operation, turn the mode switch to the OFF
position.
With the power liftgate disabled and all of the doors unlocked, the liftgate
can be manually opened and close ...
Backglass Antenna
The AM-FM antenna is integrated
with the rear window defogger,
located in the rear window.
Make sure that the inside surface of
the rear window is not scratched
and that the lines on the glas ...
Sound Menu
(Sound): Press this key or press
CONFIG to access the Sound menu to adjust the treble, midrange, bass, fade, balance,
and Digital Signal Processing (DSP). The system automatically stores audio ...