Checking Coolant
The vehicle must be on a level surface when checking the coolant level.
Check to see if coolant is visible in the coolant surge tank. If the coolant inside the coolant surge tank is boiling, do not do anything else until it cools down. If coolant is visible but the coolant level is not at or above the FULL COLD mark, add a 50/50 mixture of clean, drinkable water and DEX-COOL coolant at the coolant surge tank, but be sure the cooling system is cool before this is done.

The coolant surge tank is located in the engine compartment on the passenger side of the vehicle. See Engine Compartment Overview for more information on location.
The coolant level should be at or above the FULL COLD mark. If it is not, the vehicle may have a leak in the cooling system.
See also:
Hydraulic Power Steering
Your vehicle has hydraulic power steering. It may require maintenance. See Power
Steering Fluid Power Steering Fluid .
If power steering assist is lost because the engine stops or the power s ...
Remote Keyless Entry (RKE) System Operation (Keyless Access)
The Keyless Access System
transmitter will work up to 60m
(195 ft) away.
The Keyless Access System locks
and unlocks the doors and trunk
without pressing the buttons on
the keyless access t ...
EPB Apply
The EPB can be applied any time
the vehicle is stopped. The EPB is
applied by momentarily lifting up on
the EPB switch. Once fully applied,
the BRAKE light will be on, and the
DIC message PA ...






