Rear Wiper Blade Replacement

1. Lift the wiper blade assembly up and out of the park rest position.

2. Pull the wiper blade assembly away from the backglass. The backglass wiper

2. Pull the wiper blade assembly away from the backglass. The backglass wiper blade will not lock in a vertical position, so care should be used when pulling it away from the vehicle.

3. Turn the wiper blade assembly, and pull it off of the wiper arm. Hold the wiper arm in position and push the blade away from the wiper arm.

4. Replace the wiper blade.

4. Replace the wiper blade.

5. Return the wiper blade assembly to the park rest position.

    See also:

    Gasoline Specifications (U.S. and Canada Only)
    At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadie ...

    Fuel System Messages
    FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible TIGHTEN GAS CAP This message displays when the fuel cap is not on tight. Tighten the fuel ca ...

    Tire Sealant
    Read and follow the safe handling instructions on the label adhered to the sealant canister. Check the tire sealant expiration date on the sealant canister. The sealant canister should be repla ...