Liftgate

Power Liftgate
Vehicles with an automatic transmission must be in P (Park) and a manual transmission must be in Neutral to operate the power liftgate.
To open the liftgate from inside, select the mode then press the center of the button. See Liftgate for more information on programming the height opening settings.
To open the liftgate with the Remote
Keyless Entry (RKE) transmitter,
press and hold
on the
RKE transmitter.
To open the liftgate from outside the vehicle, press the touch pad on the outside liftgate handle.
Manual Operation of the Power Liftgate
With the vehicle in P (Park), turn the liftgate mode switch to OFF and unlock the doors. Press the touch pad under the liftgate handle and pull up on the handle. To close the liftgate, pull down on the pull cup.
See Liftgate.
See also:
Automatic Transmission
Shift Lock Control
Function Check
WARNING!
When you are doing this
inspection, the vehicle could
move suddenly. If the vehicle
moves, you or others could be
injured.
1. Before starting this check,
be sure there is enough r ...
Tire Pressure Monitor
Operation
This vehicle may have a Tire
Pressure Monitor System (TPMS).
The TPMS is designed to warn the
driver when a low tire pressure
condition exists. TPMS sensors are
mounted onto each tire and whe ...
Cargo Management System
To open the cargo management system, press the rear of the handle to unlatch
it and then lift the handle up.
A prop rod locks to hold the cover up when opened.
Four hooks are located on ...






