See also:

Arming the System
To arm the system: 1. Open the door. 2. Lock the door with the transmitter. The security light should come on and stay on. 3. Close all doors. The security light should go off after about 3 ...

Testing the Alarm
To test the alarm: 1. From inside the vehicle, lower the driver window and open the driver door. 2. Activate the system by locking the doors with the power door lock switch while the door is open, ...

SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, or 3.5m(11 ft). This zone starts at each side mirror and goes back approximately 5.0 m(16 ft). T ...