Shoulder Belt Height Adjuster (Sedan and Wagon)
The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions.
Adjust the guide so the shoulder portion of the belt is on the shoulder and not falling off of it.
The belt should be close to, but not contacting, the neck. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash. See How to Wear Safety Belts Properly.
Push down on the release button (A) and move the height adjuster to the desired position. The adjuster can be moved up by pushing up on the shoulder belt guide.
After the height adjuster is set to the desired position, try to move it down without pressing the release button to make sure it has locked into position.
See also:
Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between
tread shoulder and maximum section width.
For example:
Treadwear 200 Traction AA
Temperature A
The following info ...
Keyless Locking
The doors lock after several
seconds if all doors are closed
and at least one keyless access
transmitter has been removed
from the interior of the vehicle.
To customize if the doors
automat ...
Programming with a Recognized Transmitter
A new transmitter can be
programmed to the vehicle when
there is one recognized transmitter.
For vehicles sold in Canada, two
recognized transmitters are required
to program a new transmitter ...