Chime Volume

This feature allows you to select the volume level of the chime.

Press the customization button until Chime Volume appears on the DIC display. Press the set/reset button once to access the settings for this feature. Then press the menu up/down button to scroll through the following settings.

Normal: The chime volume will be set to a normal level.

Loud: The chime volume will be set to a loud level.

No Change: No change will be made to this feature. The current setting will remain.

There is no default for chime volume. The volume will stay at the last known setting.

To select a setting, press the set/reset button while the desired setting is displayed on the DIC.

    See also:

    Hitches
    Use the correct hitch equipment. See your dealer or a hitch dealer for assistance. - The rear bumper on the vehicle is not intended for hitches. Do not attach rental hitches or other bumper-t ...

    Leaving After Parking on a Hill
    1. Apply and hold the brake pedal. 2. Start the engine. 3. Shift into a gear. 4. Release the parking brake. 5. Let up on the brake pedal. 6. Drive slowly until the trailer is clear of the chocks. ...

    Turning the System On and Off
    The UFRPA system can be turned on and off by pressing the park assist button located next to the shift lever. The LED next to the park assist button lights up when the system is on and turns ...