Vehicle Identification

See also:

Driver Side
The removal of the underhood electrical center is required for the replacement of one of these bulbs: 1. Open the hood. See Hood. WARNING Liquids from environment or spillage and/or tools pla ...

EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and hold the brake pedal, and push down momentarily on the EPB switch. If you attempt to release the EPB without the brake pedal ...

Increasing Speed While Using Cruise Control
If the cruise control system is already activated: - Press and hold the +RES button on the steering wheel until the desired speed is reached, then release it. - To increase vehicle speed in ...