Remote Keyless Entry (RKE) System
See Radio Frequency Statement for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.
If there is a decrease in the RKE operating range:
- Check the distance.
The transmitter may be too far from the vehicle.
- Check the location. Other vehicles or objects may be blocking the signal.
- Check the transmitter's battery.
See “Battery Replacement” later in this section.
- If the transmitter is still not working correctly, see your dealer or a
qualified technician for service.
See also:
Starting the Vehicle
1. Aim the Remote Keyless Entry
(RKE) transmitter at the vehicle.
2. Press and release .
3. Immediately after completing
Step 2, press and hold for at
least four seconds or until the
vehicl ...
Programming without a Recognized Transmitter
United States owners are permitted
to program a new transmitter to
their vehicle when a recognized
transmitter is not available.
The Canadian immobilizer
standard requires that Canadian
own ...
Turning the System On and Off
The system can be disabled through
the Driver Information Center (DIC).
See “Parking Assist” under Driver
Information Center (DIC) for more information.
URPA defaults to the on setting
each ti ...