Driver Safety Belt Reminder Light
There is a driver safety belt reminder light on the instrument panel cluster.
When the vehicle is started this light flashes and a chime comes on to remind drivers to fasten their safety belt. Then the light stays on solid until the belt is buckled.
This cycle may continue several times if the driver remains or becomes unbuckled during driving while the vehicle is moving.
If the driver safety belt is already buckled, neither the light nor chime comes on.
See also:
EPB Release
To release the EPB, place the ignition in the ON/RUN position, apply and
hold the brake pedal, and push down momentarily on the EPB switch. If you
attempt to release the EPB without the brake pedal ...
Shutting the Engine Off After a Remote Start
To manually shut off the engine after
a remote start, do any of the
following:
- Press until the parking lamps
turn off.
- Turn on the hazard warning
flashers.
- Turn the ignition switch o ...
Back-Up Lamps
To replace this bulb:
1. Open the liftgate. See Liftgate for more information.
2. Remove the two screws from the taillamp assembly.
3. Pull the taillamp assembly rearward until the ...